ConfigurationRight angledcheck valve cartridgeNote: The supply scope is within theL size range, and the plug screw is notincluded in the supply scope.SizeL836.31039.31545.82055.32574.33083.311111111
Product Detail
Configuration
Right angledcheck valve cartridge
Note: The supply scope is within theL size range, and the plug screw is notincluded in the supply scope.
| Size | L |
| 8 | 36.3 |
| 10 | 39.3 |
| 15 | 45.8 |
| 20 | 55.3 |
| 25 | 74.3 |
| 30 | 83.3 |
Ordering code
Technical data
| Max.operating pressure bar | 315 | |||||
| Crack pressure bar | Refer to the characteristic curve | |||||
| Max.flow-rate L/min | Refer to the characteristic curve | |||||
| Viscosity range m㎡/s | 2.8 to 380 | |||||
| Fluid temperature range ℃ | -30 to +80 (NBR seal) | |||||
| -20 to +80 (FKM seal) | ||||||
| Fluid | Mineral oil suit for NBR and FKM seal | |||||
| Phosphate ester for FKM seal | ||||||
| Degree of contamination | Maximum permissible degree of fluid contamination: Class 9. NAS 1638 or 20/18/15, ISO4406 | |||||
| Size | 8 | 10 | 15 | 20 | 25 | 30 |
| Weight Kg | 0.03 | 0.05 | 0.08 | 0.14 | 0.32 | 0.47 |
Characteristic curves(Measured at 9o=40°C +5°C,using HLP46)
Right angled check valve cartridge
Cavity dimensions:
Right angled check valve cartridge
| Size | Plug screw | Gasket | ΦD1 | D2 | ΦD3H8 | ΦD4 | ΦD5H7 | T1+0.2/0 | T2 | T3 | T4 | T5 | T6 | T7 | X |
| JB1001 | JB982 | ||||||||||||||
| 8 | M18x1.5 | 18 | 27 | M18x1.5 | 14 | 8 | 13 | 47.5 | 46.5 | 37.5 | 23 | 17 | 14 | 7 | 18 |
| 10 | M22x1.5 | 22 | 32 | M22x1.5 | 18 | 10 | 17 | 52.5 | 51.5 | 42.5 | 25 | 19 | 16 | 7 | 19 |
| 15 | M27x2 | 27 | 37 | M27x2 | 24 | 15 | 22 | 61 | 60 | 49 | 28 | 22 | 18 | 8 | 24 |
| 20 | M33x2 | 33 | 44 | M33x2 | 30 | 20 | 28 | 72.5 | 71 | 57.5 | 28 | 24 | 20 | 8 | 30 |
| 25 | M42x2 | 42 | 55 | M42x2 | 38 | 25 | 36 | 93.5 | 91 | 75.5 | 32 | 27 | 22 | 9 | 43 |
| 30 | M48x2 | 48 | 62 | M48x2 | 44 | 30 | 42 | 104.5 | 102 | 84.5 | 38 | 30 | 24 | 9 | 48 |
Explanation:
The dimension in the list above t is in relation to the assuming JB1001 plug screw and JB982 combined gasket. If youchoose the other plug screw and washer, then the dimension of T1, T2, T3, T4, T5, T6 should be calculated again accordingto the valve's total length L, plug screw and seal ring dimensions.
