Function and configurationThe valve type DZ6DP is a direct operated pressure sequence valve. It is used for the switching over for pressure dependent connection of a secondary system. The sequence pre...
Product Detail
Function and configuration
The valve type DZ6DP is a direct operated pressure sequence valve. It is used for the switching over for pressure dependent connection of a secondary system. The sequence pressure is setting via the adjusting element(4).
The spring (3) holds the control spool (2) in the neutral position, the valve is blocked. The pressure in channel P is acting at the end surface of the control spool (2) opposite the spring (3) via the control line (6). If the pressure in channel P reaches the setting value of the spring(3), the control spool (2) is moved to the left and the connection P to A is opened. In this case, fluid flows from channel P to A without pressure drop in channel P.
The control signal is adopted internally via the control line (6) from channel P or externally via port B (X).
Depending on the use of the valve the leakage oil drain is externally via port T (Y) or internally via A.
Type DZ6DP1-L5X/...
Symbols
11
Ordering code
Technical data
| Fluid | Mineral oil suitable for NBR and FKM seal | |
| Phosphate ester for FKM seal | ||
| Fluid temperature range ℃ | -30 to +80 (NBR seal) | |
| -20 to+80 (FKM seal) | ||
| Viscosity range m㎡/s | 10 to 800 | |
| Degree of contamination | Maximum permissible degree of fluid contamination: Class 9. NAS 1638 or 20/18/15, ISO4406 | |
| Max. operating pressure | Port P,A,B(X) bar | 315 |
| Port T(Y) bar | 160 | |
| Max. adjustable sequence pressure bar | 25;75;150;210;315 | |
| Max.flow-rate L/min | 60 | |
| Weight kg | Approx.1.6 | |
Characteristic curves (Measured at oil =40°C +5°C, using HLP46)
The characteristic curves are valid for output pressure= zeroin the complete flow range.
Unit dimensions
