Function and configurationThe active connector is used for controlling proportional valves without position control. It is directly attached to the solenoid plug of the valve. The connection cable on ...
Product Detail
Function and configuration
The active connector is used for controlling proportional valves without position control. It is directly attached to the solenoid plug of the valve. The connection cable on the control side (UB, command value) is led through a gland fitting and connected. An LED signals the available supply voltage. Depending on the type of the active connector, the command value is specified as voltage 0...10V or as current 4...20mA.
The command value can be adjusted with regard to zero point and sensitivity. In case of voltage specification, a differential input is available. Apart from that, the command value can be led via a ramp. In order to allow for adjustment to special applications, the dither amplitude was designed variably. Upon delivery, the dither amplitude has already been set to a perfect value so that another adjustment is only necessary in the above-mentioned special cases.
Ordering code, accessories
Technical data
| Supply voltage nom. 24V= | Solenoid2.5A | Battery voltage 10.2...31V Rectified voltage 10.2...27V |
| Solenoid1.6A | Battery voltage 18...31V Rectified voltage 18...27V | |
| Solenoid0.8A | Battery voltage 21...31V Rectified voltage 21...27V | |
| Residual ripple | <2Vss | |
| Power consumption max. | Va | 55 (see valve data) |
| Command value | 0...10V | |
| 4...20mA | ||
| Output | Imax=2.5A(rectangular voltage,pulse-modulated) Imax=0.8A(rectangular voltage, pulse-modulated) lmax=1.6A(rectangular voltage, pulse-modulated) | |
| Ramp time | 60ms...5s | |
| Dither frequency range | Hz | 95...340 |
| Zero point calibration range | See characteristic curves | |
| Sensitivity adjustment range | ||
| Special features | LED (green): Supply voltage is available, Clocked output stage, Fast energization for short actuating times, Adjustments via trimming potentiometer. | |
| Protection class | IP 65, in plugged condition | |
| Electro-magnetic compatibility tested according to | EN 61000-6-2:2002-08 EN 61000-6-3:2002-08 | |
| Design | Connector housing | |
| Connections | -Solenoid -UB,command value | DIN 43650 Cable 5x0.75m㎡,shielded incl. PE |
| Ambient temperature | ℃ | -20...+70 |
| Storage temperature range | ℃ | -20...+85 |
| Weight | m | 0.23kg |
Valve with external trigger electronics
Characteristic curves
Characteristic curves
Unit dimensions
